Stainless Steel 347/347H Flanges,Stainless Steel 347/347H WNRF/SORF/WNRF/SORF/BLING Flanges Manufacturer, Exporter & Suppliers,ASTM A182 / ASME SA182 F347/F347H SS Slip On FLanges, SS Socket weld Flanges, SS Threaded Flanges Suppliers
ASTM A182 F347H Stainless Steel Flanges Supplier, ASTM A182 F347H Stainless Steel Flanges Dimension, ASTM A182 F347H Forged Flange, ASTM A182 F347H Blind Flange, ASTM A182 F347H Plate Flange suppliers, ASTM A182 F347H Weld Neck Flange Manufacturers, ASTM A182 F347H Slip On Flange, ASTM A182 F347H Threaded Flange Manufacturer in India
DETAILED INFORMATION
Stainless Steel F347 flanges/F347h Flanges are columbium-stabilised austenitic stainless steel flanges with good corrosion resistance and excellent resistance to strong oxidation. During the chromium carbide precipitation range of 800 – 1500°F, it provides excellent intergranular corrosion resistance. A Stainless Steel F347 flanges does not have a board or a hub centre.
It has a flange-like face thickness, a similar face type, and a similar bolting pattern. A nozzle opening can be sealed with it on a pressure vessel. There is a protruding rim around the circumference of Stainless Steel F347 flanges/F347h flanges. Machined from a forging, it is usually butt welded to a pipe. There are drilled holes on the rim that allow the flange to be bolted to another flange.
The stainless steel F347/F347h Flange is used for fluids at low pressure or with little leakage risk. 347 Stainless Steel Lap Joint Flanges are used for cooling water lines, low-pressure compressed air lines, firefighting water lines, and process lines for oil, gas, steam, condensates, etc. Both piping and duct systems use it. The flange consists of a Lap Joint Stub End that is butt welded to the pipe and a backing lap joint flange that is slid over the pipe before welding.
A pipework network is created by connecting stainless steel F347/F347h flanges to cylinders, valves, pumps, and other devices. The machinery is divided into two sections. A SS 347 Plate Flange is a flat, circular disk that is welded to the end of a pipe so that it can be bolted to another pipe. Fuel and water pipelines use it. With a gasket between the two plate flanges, they are bolted together.
There will be bolt holes around the perimeter, and it will be used to create junctions, joints, and tees. Stainless Steel F347 flanges/F347h Stainless Steel Flanges provide safety devices used to isolate a piece of tool or section of line or when the line or tools demands to be removed or inspected for service. It is different from a valve and it is a permanent or long term isolation device.
When pipe sizes change, Stainless Steel F347 flanges/F347h flanges are used. The predominant flange matches the larger pipe size but has a smaller bore that matches the smaller pipe size. Blind, slip-on, threaded, and weld neck flanges are commonly available. In addition to being available in all pressure classes, it provides a good alternative to connecting two pipes of different sizes.
Stainless Steel F347/F347h Flanges are designed for butt welding to join piping systems. As a result of its long neck and the cost of people contacting WN flange with pipeline or fitting, this type of flange requires a great deal of specification and is expensive. However, it is preferred for high-stress applications. Stresses are transmitted to the pipeline by the hubs or necks. The stainless steel F347/F347h flange is a disc-shaped flange that is available with either a raised face or a ring type joint. An on-flange flow nozzle measures the flow of fluid conveyed by the pipeline.
We are one of the leading manufacturers and suppliers of Stainless Steel F347/F347h Flanges in India. In addition to UNS S34709 Stainless Steel 347H Slip On Flanges, we offer several other types of products for a variety of applications in chemical, petrochemical, building, and construction industries.
Stainless Steel F347/F347h Flanges are made of niobium stabilised austenitic stainless steel. ASTM A182 stainless steel flanges are known for their good corrosion resistance. When exposed to temperatures in the chromium carbide precipitation range, ANSI B16.5 Stainless Steel Flanges show excellent resistance to intergranular corrosion.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
COUNTRIES WE DELIVER
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.
Stainless Steel F347 Flanfes /F347h Flanges Specification Sizes
F347 & F347H Specifications |
ASTM A182/ ASME SA182 |
Most common types of F347 & F347H Flanges |
|
Stainless Steel F347/F347h Flanges size range |
1/2″ (15 NB) to 48″ (1200 NB) DN10~DN5000 |
Stainless Steel F347/F347h Flanges Test Certificates |
EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Stainless Steel F347/F347h Flanges Standards |
ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
Stainless Steel F347/F347h Flanges |
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
Main Types |
Forged / Threaded / Screwed / Plate |
Flanges supporting material |
Gasket, Ring Joint, Flanges Bolts |
Production technique |
|
Stainless Steel F347/F347h Flanges Type/ Flanges Face Type |
Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Special design |
As per your drawing AS, ANSI, BS, DIN and JIS 15 NB (1/2″) to 200 NB (8″) Equal and Reducing Configurations ASTM A182 F347H Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange |
Specialised manufacturer of |
|
Test |
Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI ultrasonic flaw detector, Magnetic particle detector |
Equipment |
Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Origin |
Indian / West Europe / Japan / USA / Korean |
Stainless Steel F347/F347h Flanges Flanges Standard |
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange
|
Stainless Steel F347 Flanges /F347h Flanges Chemical Composition
Grade |
Si |
P |
S |
Ni |
Fe |
C |
Mn |
Cr |
Cb |
SS F347 |
1.0 max |
0.045 max |
0.030 max |
9.00 – 13.00 |
62.74 min |
0.08 max |
2.0 max |
17.00 – 20.00 |
10xC – 1.10 |
SS F347H |
1.0 max |
0.045 max |
0.030 max |
9.0 -13.0 |
63.72 min |
0.04 – 0.10 |
2.0 max |
17.00 – 19.00 |
8xC – 1.10 |
Stainless Steel F347 Flanges /F347h FlangesMechanical Properties
Tensile Strength |
Yield Strength (0.2%Offset) |
Density |
Melting Point |
Elongation |
Psi – 75000 , MPa – 515 |
Psi – 30000 , MPa – 205 |
8.0 g/cm3 |
1454 °C (2650 °F) |
35 % |
Stainless Steel F347 Flanges /F347h Flanges Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN |
SS F347 | 1.4550 | S34700 | SUS 347 | 08Ch18N12B | X6CrNiNb18-10 |
SS F347H | 1.4961 | S34709 | SUS 347H | – | X6CrNiNb18-12 |
Stainless Steel F347 Flanges /F347h Flanges Pressure Ratings
ASME/ANSI B 16.5 | Blind Flange, High Hub Blind Flange, Slip on Flange, Welding Neck Flange, Socket Weld Flange, Ring Type Joint Flange, Lap Joint Flange, Threaded Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.47 | Blind Flange [Series A & B],Welding Neck Flange |
PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
ASME/ANSI B 16.36 | Slip on Flange, Threaded Flange, Welding Neck Flange, |
PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
BS 4504 SEC 3.1 | Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange, Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, |
PRESSURE CLASS | PN 2.5 TO PN 40 |
BS 4504[PART 1] | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
PRESSURE CLASS | PN 2.5 TO PN 400 |
BS 1560 BOSS | Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange, Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
TABLE | D, E, F, H |
DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
PRESSURE CLASS | PN 6 TO PN 100 |
Stainless Steel F347/F347h Flanges Available Types Shapes
Stainless Steel UNS S34700 Flanges |
Stainless Steel 347 Slip on Flanges |
Stainless Steel F347 Flanges |
Stainless Steel 347H EN 1092-1 Flanges |
Stainless Steel F347 BS 4504 Flanges |
Stainless Steel 347H Forged Flanges |
SS F347 Flat Flange Suppliers |
ANSI 347H Stainless Steel Blind Flange |
SS F347 Weld Neck Flanges Dealer |
SS 347 Socket weld Flanges Exporter |
SS F347H Long Weld Neck Flanges Stockholder |
Steel UNS S34709 Threaded Flanges Distributors |
Stainless Steel SUS F347 Reducing Flanges |
SS 347 Ring Type Joint Flanges Manufacturer |
Stainless Steel DIN 1.4550 Orifice Flange |
Stainless Steel BS 347S31 Spectacle Blind Flanges |
Stainless Steel F347 WNRF Flange |
Stainless Steel 347 SORF Flanges |
ANSI B16.5 SS 347H RTJ Flanges |
SS 347H Screwed Flanges Stockist |
ASTM A182 SS F347 Lap Joint Flanges |
ASME SA182 SS 347 BLRF Flange |
Stainless Steel 347 Raised Face Flanges |
347 SS Nipoflange |
ASTM A182 F347H BLRF |
ASTM A182 SS 347H RTJF |
A182 SS 347 Square Flanges |
ASME SA182M SS 347 SWRF Flange |
Steel 347 Tongue & Groove Flanges |
SS 347H Male & Female Flanges |
ASTM A182 Grade F347H WNRF |
ASTM A182 SS 347H SORF |
Stainless Steel 347H DIN Flanges |
SS 347 ASME B16.5 Flanges |
For Quick Delivery Stainless Steel F347/F347h Flanges In Ready Stock
ASME SA182 Stainless Steel 347 Threaded Flanges |
ASTM A182 Stainless 347 Weld Neck Flanges |
Grade 347 Stainless Steel Slip On Flanges |
ASME SA182 SS347 Socket Weld Flanges |
ASTM A182 Stainless 347H Blind Flanges |
347/347H Stainless Steel Lap Joint Flanges |
ASME SA182 F347/F347H Plate Flanges |
ASME 16.5 Flanges 347/347H Stainless Steel |
Stainless Steel 347H Reducing Flanges |
Stainless Steel 347 Orifice Flanges |
347/347H Stainless Steel Nipo Flanges |
Grade 347 Stainless Steel Weldo Flanges |
ASTM A182 F347H Long Weld Neck Flanges |
ASME SA182 SS347 SWRF Flanges |
Stainless Steel 347 ASME Flanges |
347/347H Stainless Steel ASME 16.5 forged Flanges |
ASME SA182 F347H SORF Flanges |
ASME SA182 F347/F347H Long Welding Neck Flange |
ASTM A182 Stainless F347H Collar Flange |
Grade 347 Stainless Steel Raised Face Flange |
347 Stainless Steel Flat Flanges |
Stainless Steel 347 Loose Flanges |
ss 347/347H Square Flanges |
ASME SA182 SS347 Expander Flanges |
ASME SA182 SS347 Ring Type Joint Flanges |
Stainless Steel 347 RTJ |
347/347H Stainless Steel BLRF Flanges |
Grade 347 Stainless Steel Groove & Tongue Flanges |
ASME SA182 Stainless Steel 30 High Hub Blinds Flanges |
ASME SA182 Stainless Steel 30 Spectacle Blind Flanges |
ASME SA182 F347/F347H Weld Neck Flanges Series A or B |
ASME SA182 347H Spades Ring Spacers Flanges |
347/347H Stainless Steel Screwed Flanges |
Grade 347 Stainless Steel Lip type Flanges |
Grade 347 Stainless Steel WNRF Flanges |
ASME SA182 F347/F347H Flange Facing Type & Finish |
Stainless Steel 347 Puddle Flanges |
Stainless Steel 347 Socket Welding Flange |
ASME SA182 Stainless Steel 347 Flat Face Flange |
ASTM A182 347 Lap Joint Ring Flange |
Stainless Steel F347/F347h Flanges Price List in India
- ASTM A182 F347H Stainless Steel Flange, 3/4 NPT Pipe Size (In.): $40.25 / pkg.
- Stainless Steel 347 Pipe Flange, 1 NPT Pipe Size (In.): $35.10 / pkg.
- 347/347H Stainless Steel Flange, 1 NPT Pipe Size (In.): $35.40 / pkg.
- 347H Stainless Steel Flange, 1-1/2 NPT Pipe Size (In.): $28.00 / pkg.
Stainless Steel F347/F347h Flanges Rating Chart
Standards |
Size Range |
Pressure Rating |
Types of A182 F347/ H flange |
ASA/ ASME B16.5 |
1/2 – 24 Inches |
ANSI 150, #300 |
Blind, Plate, Weld Neck, Slip on |
ANSI 600, #900 |
Socket Weld, Threaded RTJ (tring type joint) |
||
ANSI 1500, #2500 |
FF (flat) and RF (raised) Face |
||
ANSI B16.47(A) |
1/2-60 Inches |
ANSI 150, #300 |
Slip on, Weld neck RTJ(ring type joint) |
ANSI 400, #600, #900 |
FF (flat) and RF (raised) Face |
||
ANSI B16.5(B) |
26-60 Inches |
ANSI 75, #150, #300 |
Slip on, Weld neck RTJ (ring type joint) |
FF (flat) and RF (raised) Face |
|||
ANSI B16.36 |
1-24 Inches |
ANSI 300, #400, #600 |
Slip on, Weld neck, Threaded RTJ |
ANSI 900, #1500, #2500 |
FF (flat) and RF (raised) Face |
||
Type 01 EN1092-1 |
DN10-DN2000 |
PN6, PN25, PN10, PN40 |
Plate |
Type 05 EN1092-1 |
DN10-DN3000 |
PN25, PN10, PN40 PN6, |
Blind / BLRF |
Type 11 EN1092-1 |
DN10-DN3000 |
PN6, PN25, PN40 PN10, |
Weld neck flange |
Type 13 EN1092-1 |
DN10-DN150 |
PN10, PN6, PN40 PN25, |
Threaded Pipe flanges |
Type 02 EN1092-1 |
DN15-DN1000 |
PN10, PN40 PN6, |
Loose flanges |
GOST / FLAT 12821-80 |
DN15-DN2000 |
PN0.6MPa, 1.0MPa, 1.6MPa, |
Plate flanges |
PN2.5MPa, 6.4MPa, 4.0MPa, |
FF (flat) and RF (raised) Face |
||
GOST / FLAT 12821-80 |
DN15-DN2000 |
1.0MPa, PN0.6MPa, 1.6MPa, |
Weld neck flange |
4.0MPa, 6.4MPa, PN2.5MPa, |
FF (flat) and RF (raised) Face |
||
GOST/ГОСТ 12836 |
DN15-DN2000 |
PN0.6MPa, 1.0MPa, 1.6MPa, |
Blind Pipe flanges |
PN2.5MPa, 4.0MPa |
FF (flat) and RF (raised) Face |
Stainless Steel F347/F347h Flanges Available Types
Stainless Steel 347 Flanges |
Stainless Steel 347H EN 1092-1 Flanges |
Stainless Steel 347 BS 4504 Flanges |
Stainless Steel 347H Forged Flanges |
Stainless Steel UNS S34700 Flanges |
Stainless Steel 347 Slip on Flanges |
SS 347H Flat Flange Suppliers |
ANSI 347 Stainless Steel Blind Flange |
SS UNS S34709 Weld Neck Flanges Dealer |
SS 347 Socket weld Flanges Exporter |
SS 347H Long Weld Neck Flanges Stockholder |
Steel 347 Threaded Flanges Distributors |
Stainless Steel SUS 347 Reducing Flanges |
SS 347H Ring Type Joint Flanges Manufacturer |
Stainless Steel DIN 1.4550 Orifice Flange |
Stainless Steel DIN 1.4961 Spectacle Blind Flanges |
Stainless Steel 347 WNRF Flange |
Stainless 347H SORF Flanges |
ANSI B16.5 SS 347H RTJ Flanges |
SS 347 Screwed Flanges Stockist |
ASTM A182 SS 347H Lap Joint Flanges |
ASME SA182 SS 347 BLRF Flange |
Stainless Steel 347 Raised Face Flanges |
347H SS Nipoflange |
A182 SS 347H Square Flanges |
ASME SA182M SS 347 SWRF Flange |
Steel 347 Tongue & Groove Flanges |
SS 347H Male & Female Flanges |
Stainless Steel 347 DIN Flanges |
SS 347H ASME B16.5 Flanges |
Stainless Steel F347/F347h Flanges Price
ASTM A182 F347 Class 150 Flange |
ASME SA182 F347H Flange Weight 150# |
A182 F347H Class 300 Flange |
ASTM A182 Grade F347 Rtj 1500 Flange |
Stainless Steel ASTM A182 F347 Class 1500 Flange |
A182 Gr F347H Ring Type Joint |
ASTM A182 Gr F347 Class 600 Flange |
347H Stainless Steel Flat Face Flange |
ASME SA182 F347H Class 900 Flange |
ASTM A182 Grade F347 Slip On Flange |
ASTM A182 Grade F347 Class 2500 Flange |
SA182 Gr F347H Rtj 900 Flange |
A182 Gr F347H Pn16 Flange |
Stainless Steel 347 Rtj Flanges |
347H Stainless Steel Pn10 Flange |
SA182 Grade F347 Npt |
ASTM A182 Grade F347 Pn40 Flange |
ASTM A182 F347 Stainless Steel Jis 5k Flange |
SA182 Gr F347H Pn 160 Flange |
SS F347H Jis B2220 |
Stainless Steel 347 Pn 64 Flange |
SS UNS S34700 Jis 10k Flange |
SA182 Grade F347 Dn150 Pn16 Flange |
ASTM A182 347 SS Kf Flange |
ASTM A182 F347 Stainless Steel Din 2527 Flange |
ASTM A182 F347 B16.47 Flange |
SS F347H Din En 1092-1 Flange |
A182 F347H ANSI B16.5 150 Flange |
SS UNS S34700 Din 2633 Flange |
A182 F347H Threaded Flange |
ASTM A182 347 SS Din 2576 Flange |
Stainless Steel ASTM A182 F347 Flange With 1/2 Npt |
ASTM A182 F347 ASME B16.5 Class 300 Flange |
ASTM A182 Gr F347 Flange With Threaded Hole |
Stainless Steel F347/F347h Flanges Available Grades
ASTM A182 F304 Flange |
ASTM A182 F304L Flange |
ASTM A182 F304H Flange |
ASTM A182 F310/F310S Flange |
ASTM A182 F316 Flange |
ASTM A182 F316L Flange |
ASTM A182 F316H Flange |
ASTM A182 F316Ti Flange |
ASTM A182 F317 Flange |
ASTM A182 F317L Flange |
ASTM A182 F321 Flange |
ASTM A182 F347/F347H Flange |
ASTM A182 F904L Flange |
347 Stainless Steel Flange Weight In Kg
NOMINAL SIZE | DIMENSIONS | WEIGHT (KG) | ||||
NPS (Inches) |
DN (mm) |
FLANGE OD A MM |
FLANGE THICKNESS D MM |
SOW SW |
WN | BLIND |
1/2 | 15 | 95.3 | 14.2 | 0.6 | 0.8 | 0.6 |
3/4 | 20 | 117.3 | 15.7 | 1.1 | 1.3 | 1.1 |
1 | 25 | 124 | 17.5 | 1.4 | 1.5 | 1.4 |
1 1/4 | 32 | 133.4 | 19.1 | 1.7 | 2.0 | 1.8 |
1 1/2 | 40 | 155.5 | 20.6 | 2.5 | 2.9 | 2.7 |
2 | 50 | 165.1 | 22.4 | 2.9 | 3.4 | 3.2 |
2 1/2 | 65 | 190.5 | 25.4 | 4.3 | 5.2 | 4.9 |
3 | 80 | 215.9 | 28.4 | 5.9 | 6.9 | 6.8 |
3 1/2 | 90 | 228.6 | 30.2 | 7.3 | 8.7 | 8.7 |
4 | 100 | 254 | 31.8 | 9.6 | 11.2 | 11.5 |
5 | 125 | 279.4 | 35.1 | 12.3 | 15.1 | 15.6 |
6 | 150 | 317.5 | 36.6 | 15.6 | 19.1 | 20.9 |
8 | 200 | 381 | 41.1 | 24.2 | 29.9 | 34.3 |
10 | 250 | 444.5 | 47.6 | 34.1 | 42.7 | 53.3 |
12 | 300 | 520.7 | 50.8 | 49.8 | 61.8 | 78.8 |
14 | 350 | 584.2 | 53.8 | 69.9 | 85.8 | 105.0 |
16 | 400 | 647.7 | 57.2 | 88.1 | 106.0 | 137.0 |
18 | 450 | 711.2 | 60.5 | 109.0 | 131.0 | 175.0 |
20 | 500 | 774.7 | 63.5 | 134.0 | 158.0 | 221.0 |
24 | 600 | 914.4 | 70.0 | 201.0 | 230.0 | 339.0 |
How To Order Stainless Steel 347/347h Flanges?
- Type of flange (welding neck, slip-on, threaded, lap joint flange, etc.)
- Flange specifications for Grade 347/347H stainless steel (for example ASME B16.5, ASME B16.47 type A, EN 1092-1, JIS, UNI, DIN, etc.)
- Size of the nominal pipe (NPS)
- SS 347/347H Flange rating (or class): Flanges’ ratings can range from 150 to 2500 for ASME flanges, from 5k to 30k for JIS B2220 flanges and KS1503 flanges; PN 6 up to PN 100 for flanges of European and Russian standards (DIN, UNI, EN 1092-1, GOST 12820 / 12821-80); for SANS/SABS flanges (South African standard for flanges), the class 600/3, 1000/3, 1600/3, 2500/3, 4000/3 are the range.
- Schedule of flange flanges for welding neck welds and socket welds
- A stainless steel 347/347H flange is available in three different facing types (FF, RF, and RTJ). According to ASME B16.5, a raised face is the standard facing for flanges (different facings, such as RTJ, and flat face FF, need to be ordered separately).
- The surface finish of stainless steel 347/347H flanges can be smooth, stock, concentric serrated, etc.
- Flange Quantity for Stainless Steel 347/347H
Our Blog

Latest Price list of Stainless Steel Forged Fittings
List of pipe fittings 1. Tee and Wye Fittings Three pieces of pipe are connected with tees and...
Request A Quote
Fill all information details to consult with us to get services from us
What are our quality inspection standards?
Our key qualities and services comprise of:
• Quality assured goods
• Multiple payment modes
• Experienced crew
• Prompt shipment
• Ethical business policies
• Wide distribution network
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
How can I place an order?
To place an order and receive a quote you can visit us on our website