Manufacturer Of Astm A213 T5 Seamless Tubes, Asme Sa213 T5 Alloy Steel Tube, Alloy Steel Gr T5 Smls Tubes
Manufacturer Of Astm A213 Gr T5 Smls Tubes, Exporter Of Asme Sa213 Gr T5 Tube, Stockist Of Alloy Steel T5 Boiler Tubes, Exporter Of Astm A213/ Asme Sa213 Gr T5 Tube/ U Tubes
DETAILED INFORMATION
The ASTM A213 T5 standard applies to seamless alloy-steel boiler, superheater, and heat-exchanger tubes. As per ASTM A213 T5, seamless alloy tubes shall be made by the seamless process and finished either hot or cold.ASTM A213 T5 alloy seamless steel tubes can be used for Boiler, Superheater and Heat-exchangers.
Tubes of various specifications, grades, and dimensions are manufactured and supplied by The Steel Exporter. Tube diameters range from 12 inches to 5 inches, with wall thicknesses ranging from 1mm to 200mm. ASTM A213 T5 can also be made up to a length of 2500mm. In this grade of tubes, pressure grades are expressed as schedules, and there are 20 through XXS schedules.
ASTM A213 Grade T5 Tubes can be square, round, rectangular or hydraulic depending on the application. Applications include heat exchangers, boilers, hydraulics, aircraft, aerospace, and condenser components. Our ASTM A213 T5 pipes are made from the highest quality materials and can withstand high temperatures and pressures.
ASTM A213 T5 tubing is usually 3/4 in diameter and 3/4 in thick. Outside diameter of [19.05 mm] to 5 in. The minimum wall thickness is [127 mm] or, if specified in the order, the average wall thickness is [127 mm]. As long as all other requirements of this specification are met, tubes with other diameters can be furnished.
Hot rolled or cold drawn ASTM A213 T5 tubes can be normalizing rolled, thermomechanical rolled, normalized and tempered, quenched and tempered, etc. Dinesh Tube India manufactures ASTM A213 T5 Tube in various dimensions and shapes.
There are tubes available in ASTM A213 Gr T5 that have an outer diameter of 12 inches to 5 inches, a wall thickness of 1mm to 200mm, and a length of up to 2500mm.
The material is composed of carbon, manganese, sulfur, silicon, phosphorus, chromium, and molybdenum, which makes it strong, corrosion-resistant, and ductile. 213 Grade T5 Tubes are similar in strength to 304 and 316 grades of stainless steel.
This material is chloride- and pitting-resistant due to its chromium and molybdenum content. Additionally, A213 T5 Alloy Steel Tube is resistant to reducing acids and other general corrosive media.
Preheating and post-weld heat treatment are required when welding A213 T5 Alloy Steel Seamless Tube to other materials. Full or isothermal annealing with normalize and temper methods can be used for the heat treatment. For more information on the product and a price list, please contact us.
CITIES WE DELIVER
Adoni, Amaravati, Anantapur, Chandragiri, Chittoor, Dowlaiswaram ,Eluru, Guntur, Kadapa, Kakinada, Kurnool, Machilipatnam, Nagarjunakoṇḍa, Rajahmundry, Srikakulam, Tirupati, Vijayawada, Visakhapatnam, Vizianagaram, Yemmiganur, Itanagar, Dhuburi, Dibrugarh, Dispur, Guwahati, Jorhat, Nagaon, Sivasagar, Silchar, Tezpur, Tinsukia, Ara, Barauni, Begusarai, Bettiah, Bhagalpur, Bihar, Sharif, Bodh Gaya, Buxar, Chapra, Darbhanga, Dehri, Dinapur Nizamat, Gaya, Hajipur, Jamalpur, Katihar, Madhubani, Motihari, Munger, Muzaffarpur, Patna, Purnia, Pusa, Saharsa, Samastipur, Sasaram, Sitamarhi, Siwan, Chandigarh, Ambikapur, Bhilai, Bilaspur, Dhamtari, Durg, Jagdalpur, Raipur, Rajnandgaon, Daman, Diu, Silvassa, Delhi, New Delhi, Madgaon, Panaji, Ahmadabad, Amreli, Bharuch, Bhavnagar, Bhuj, Dwarka, Gandhinagar, Godhra, Jamnagar, Junagadh, Kandla, Khambhat, Kheda, Mahesana, Morbi, Nadiad, Navsari, Okha, Palanpur, Patan, Porbandar, Rajkot, Surat, Surendranagar, Valsad, Veraval, Ambala, Bhiwani, Chandigarh, Faridabad, Firozpur Jhirka, Gurugram, Hansi, Hisar, Jind, Kaithal, Karnal, Kurukshetra, Panipat, Pehowa, Rewari, Rohtak, Sirsa, Sonipat, Bilaspur, Chamba, Dalhousie, Dharmshala, Hamirpur, Kangra, Kullu, Mandi, Nahan, Shimla, Una, Anantnag, Baramula, Doda, Gulmarg, Jammu, Kathua, Punch, Rajouri, Srinagar, Udhampur, Bokaro, Chaibasa, Deoghar, Dhanbad, Dumka, Giridih, Hazaribag, Jamshedpur, Jharia, Rajmahal, Ranchi, Saraikela, Badami, Ballari, Bengaluru, Belagavi, Bhadravati, Bidar, Chikkamagaluru, Chitradurga, Davangere, Halebid, Hassan, Hubballi-Dharwad, Kalaburagi, Kolar, Madikeri, Mandya, Mangaluru, Mysuru, Raichur, Shivamogga, Shravanabelagola, Shrirangapattana, Tumakuru, Vijayapura, Alappuzha, Vatakara, Idukki, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Mattancheri, Palakkad, Thalassery, Thiruvananthapuram, Thrissur, Kargil, Leh, Balaghat, Barwani, Betul, Bharhut, Bhind, Bhojpur, Bhopal, Burhanpur, Chhatarpur, Chhindwara, Damoh, Datia, Dewas, Dhar, Dr. Ambedkar Nagar (Mhow), Guna, Gwalior, Hoshangabad, Indore, Itarsi, Jabalpur, Jhabua, Khajuraho, Khandwa, Khargone, Maheshwar, Mandla, Mandsaur, Morena, Murwara, Narsimhapur, Narsinghgarh, Narwar, Neemuch, Nowgong, Orchha, Panna, Raisen, Rajgarh, Ratlam, Rewa, Sagar, Sarangpur, Satna, Sehore, Seoni, Shahdol, Shajapur, Sheopur, Shivpuri, Ujjain, Vidisha, Ahmadnagar, Akola, Amravati, Aurangabad, Bhandara, Bhusawal, Bid, Buldhana, Chandrapur, Daulatabad, Dhule, Jalgaon, Kalyan, Karli, Kolhapur, Mahabaleshwar, Malegaon, Matheran, Mumbai, Nagpur, Nanded, Nashik, Osmanabad, Pandharpur, Parbhani, Pune, Ratnagiri, Sangli, Satara, Sevagram, Solapur, Thane, Ulhasnagar,n Vasai-Virar, Wardha, Yavatmal, Imphal, Cherrapunji, Shillong, Aizawl, Lunglei, Kohima, Mon, Phek, Wokha, Zunheboto, Balangir, Baleshwar, Baripada, Bhubaneshwar, Brahmapur, Cuttack, Dhenkanal, Kendujhar, Konark, Koraput, Paradip, Phulabani, Puri, Sambalpur, Udayagiri, Karaikal, Mahe, Puducherry, Yanam, Amritsar, Batala, Chandigarh, Faridkot, Firozpur, Gurdaspur, Hoshiarpur, Jalandhar, Kapurthala, Ludhiana, Nabha, Patiala, Rupnagar, Sangrur, Abu, Ajmer, Alwar, Amer, Barmer, Beawar, Bharatpur, Bhilwara, Bikaner, Bundi, Chittaurgarh, Churu, Dhaulpur, Dungarpur, Ganganagar, Hanumangarh, Jaipur, Jaisalmer, Jalor, Jhalawar, Jhunjhunu, Jodhpur, Kishangarh, Kota, Merta, Nagaur, Nathdwara, Pali, Phalodi, Pushkar, Sawai Madhopur, Shahpura, Sikar, Sirohi, Tonk, Udaipur, Gangtok, Gyalshing, Lachung, Mangan, Arcot, Chengalpattu, Chennai, Chidambaram, Coimbatore, Cuddalore, Dharmapuri, Dindigul, Erode, Kanchipuram, Kanniyakumari, Kodaikanal, Kumbakonam, Madurai, Mamallapuram, Nagappattinam, Nagercoil, Palayamkottai, Pudukkottai, Rajapalayam, Ramanathapuram, Salem, Thanjavur, Tiruchchirappalli, Tirunelveli, Tiruppur, Thoothukudi, Udhagamandalam, Vellore, Hyderabad, Karimnagar, Khammam, Mahbubnagar, Nizamabad, Sangareddi, Warangal, Agartala, Agra, Aligarh, Amroha, Ayodhya, Azamgarh, Bahraich, Ballia, Banda, Bara Banki, Bareilly, Basti, Bijnor, Bithur, Budaun, Bulandshahr, Deoria, Etah, Etawah, Faizabad, Farrukhabad-cum-Fatehgarh, Fatehpur, Fatehpur Sikri, Ghaziabad, Ghazipur, Gonda, Gorakhpur, Hamirpur, Hardoi, Hathras, Jalaun, Jaunpur, Jhansi, Kannauj, Kanpur, Lakhimpur, Lalitpur, Lucknow, Mainpuri, Mathura, Meerut, Mirzapur-Vindhyachal, Moradabad, Muzaffarnagar, Partapgarh, Pilibhit, Prayagraj, Rae Bareli, Rampur, Saharanpur, Sambhal, Shahjahanpur, Sitapur, Sultanpur, Tehri, Varanasi, Almora, Dehra Dun, Haridwar, Mussoorie, Nainital, Pithoragarh, Alipore, Alipur Duar, Asansol, Baharampur, Bally, Balurghat, Bankura, Baranagar, Barasat, Barrackpore, Basirhat, Bhatpara, Bishnupur, Budge Budge, Burdwan, Chandernagore, Darjeeling, Diamond Harbour, Dum Dum, Durgapur, Halisahar, Haora, Hugli, Ingraj Bazar, Jalpaiguri, Kalimpong, Kamarhati, Kanchrapara, Kharagpur, Cooch Behar, Kolkata, Krishnanagar, Malda, Midnapore, Murshidabad, Nabadwip, Palashi, Panihati, Purulia, Raiganj, Santipur, Shantiniketan, Shrirampur, Siliguri, Siuri, Tamluk, Titagarh
COUNTRIES WE DELIVER
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua-Barbuda Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia-Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina-Faso, Burundi, Côte d’Ivoire, Cabo Verde, Cambodia, Cameroon, Canada, Central African Republic, Chad, Chile, China, Colombia, Comoros, Congo (Congo-Brazzaville), Costa-Rica, Croatia, Cuba, Cyprus, Czechia (Czech Republic), Democratic Republic of the Congo, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Eswatini (fmr. “Swaziland”), Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Holy See, Honduras, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Myanmar (formerly Burma), Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, North Korea, North Macedonia, Norway, Oman, Pakistan, Palau, Palestine-State, Panama, Papua, New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Rwanda, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Sweden, Switzerland, Syria, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States of America, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, Zimbabwe.
ASTM A213 T5 Alloy Tube Chemical Composition
Chemical Components (%) | ||||||||||||
Grade | C | Mn | P | S | Si | Cr | Mo | V | Nb | N | Al | others |
T5 | 0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | 0.5 | 4.0-6.0 | 0.45-0.65 | |||||
T5b | 0.15 | 0.30-0.60 | ≤0.025 | ≤0.025 | 1.0-2.0 | 4.0-6.0 | 0.45-0.65 |
Chemical Composition Of ASTM A213 T5 Alloy Tubes
Compositions | Data |
UNS Designa-tion | K41545 |
Carbon(max.) | 0.15 |
Manganese | 0.30-0.60 |
Phosphorus(max.) | 0.025 |
Silicon(max.) | 0.50 |
Chromium | 4.00-6.00 |
Molybdenum | 0.45-0.65 |
Other Elements | … |
Properties | Data |
Tensile strength, min, (MPa) | 415 Mpa |
Yield strength, min, (MPa) | 205 Mpa |
Elongation, min, (%), L/T | 30/20 |
Mechanical Tests Specified For ASTM A213 T5 Alloy Tubes
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test | |
For material heat treated in a batch-type furnace, tests shall be made on 5% of the Pipe from each treated lot. For small lots, at least one Pipe shall be tested. | |
For material heat treated by the continuous process, tests shall be made on a sufficient number of Pipe to constitute 5% of the lot, but in no case less than 2 Pipe. | |
Notes for Hardness Test: | P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC]. |
Notes for Bend Test: | For Pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test. |
Other Pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser. | |
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion. | |
The inside diameter of the bend shall be 1 inch [25 mm]. | |
Hydrostatic Test | Each length of Pipe shall be Hydro tested, at option of manufacture nondestructive electric testing can be used. |
ASTM A213 T5 Alloy Tube Heat Treatment Requirements
Grade | UNS Number | Heat Treat Type | Austenitizing/ Solutioning Temperature, min or range °F [°C] | Subcritical Annealing or Tempering Temperature, Min or range °F [°C] |
T5 | K41545 | full or isothermal anneal normalize and temper | … | 1250 [675] |
T5b | K51545 | full or isothermal anneal normalize and temper | … | 1250 [675] |
ASTM A213 T5 Alloy Tube Tensile Requirements And Hardness
Mechanical properties | ||||
Grade | Tensile | Yield | Elongation | Hardness |
Strength (Mpa) | Strength (Mpa) | (%) | ||
T5 | ≥415 | ≥205 | ≥30 | ≤89HRB |
Heat Treatment Requirements Of ASTM A213 T5 Alloy Tubes
|
T5, T9, T11, T22 and T91 |
|
|
Grade |
Heat Treatment Type |
Normalizing Temperature Range F [C] |
Subcritical Annealing or Tempering Temperature Range F [C] |
T5 (b,c) |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1250 [675] |
|
Subcritical Anneal (T5c only) |
***** |
1325 – 1375 [715 – 745] |
T9 |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1250 [675] |
T11 |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1200 [650] |
T22 |
Full or Isothermal Anneal |
|
|
|
Normalize and Temper |
***** |
1250 [675] |
T91 |
Normalize and Temper |
1900-1975 [1040 – 1080] |
1350-1470 [730 – 800] |
|
Quench and Temper |
1900-1975 [1040 – 1080] |
1350-1470 [730 – 800] |
Permissible Variation In Wall Thickness Of ASTM A213 T5 Alloy Tubes
Specifications |
Allowable Wall Variations in % |
|
ASTMA-213 Seamless Ferritic & Austenitic steel, Boiler & Superheater Tubes & Austenitic steel Heat exchange Tubes |
Over |
Under |
20 20 22 22 22 22 |
0 0 0 0 0 0 |
Elongation Requirements Of ASTM A213 T5 Alloy Tubes
Calculated Minimum Elongation Values |
|||||
Elongation in 2 in. or 50 mm, min % |
|||||
Wall Thickness |
T5, T9, T11, T22 |
P91 |
|||
in. |
mm |
Longitudinal |
Transverse |
Longitudinal |
|
5/16 (0.312) |
8 |
|
30 |
20 |
20 |
9/32 (0.281) |
7.2 |
|
28 |
19 |
19 |
1/4 (0.250) |
6.4 |
|
27 |
18 |
18 |
7/32 (0.219) |
5.6 |
|
26 |
|
17 |
3/16 (0.188) |
4.8 |
|
24 |
|
16 |
5/32 (0.156) |
4 |
|
22 |
|
15 |
7/8 (0.125) |
3.2 |
|
21 |
|
14 |
3/32 (0.094) |
2.4 |
|
20 |
|
13 |
1/18 (0.062) |
1.6 |
|
18 |
|
12 |
Permissible Variations In Outside Diameter Of ASTM A213 T5 Alloy Tubes
Specifications |
Allowable Outside Diameter Variations in mm |
Testing |
||
ASTMA-213 Seamless Ferritic & Austenitic steel, Boiler & Superheater Tubes & Austenitic steel Heat exchange Tubes |
Diameter |
Over |
Under |
• Tension Test • Flattening Test • Flare Test • Hardness Test • 100% Hydrostatic Test or NDT |
Under 25.4 25.4-38.1 incl. 38.1-50.8 excl. 50.8-63.5 encl. 63.5-76.2 excl. 76.2-101.6 incl. |
0.1016 0.1524 0.2032 0.2540 0.3048 0.3810 |
0.1016 0.1524 0.2032 0.2540 0.3048 0.3810 |
ASTM A213 T5 Alloy Tube Required Markings On Each Length
In addition, markings will include: | ||||||||||||||||||||||||||
Length of Pipe |
|
|||||||||||||||||||||||||
Schedule Number | ||||||||||||||||||||||||||
Heat Number or Manufacturer’s number by which heat can be identified | ||||||||||||||||||||||||||
An Additional Symbol “S” if the Pipe conforms to any Supplementary Requirements | ||||||||||||||||||||||||||
S1 – Product Analysis | ||||||||||||||||||||||||||
S2 – Transverse Tension Test | ||||||||||||||||||||||||||
S3 – Flattening Test | ||||||||||||||||||||||||||
S4 – Metal Structure and Etching Tests | ||||||||||||||||||||||||||
S5 – Photomicrographs | ||||||||||||||||||||||||||
S6 – Photomicrographs for Individual Pieces | ||||||||||||||||||||||||||
S7 – Alternative Heat Treatment – Grade P91 | ||||||||||||||||||||||||||
Pipe that has been weld repaired shall be marked “WR”. |
Astm A213 Alloy Steel T5 Seamless Tubes Diameter
Hot rolled |
Outside Diameter, mm |
Tolerance, mm |
Outer Diameter≤101.6 |
+0.4/-0.8 |
|
101.6<Outer Diameter≤190.5 |
+0.4/-1.2 |
|
190.5<Outer Diameter≤228.6 |
+0.4/-1.6 |
|
Cold Drawn |
Outside Diameter, mm |
Tolerance, mm |
Outer Diameter<25.4 |
±0.10 |
|
25.4≤Outer Diameter≤38.1 |
±0.15 |
|
38.1<Outer Diameter<50.8 |
±0.20 |
|
50.8≤Outer Diameter<63.5 |
±0.25 |
|
63.5≤Outer Diameter<76.2 |
±0.30 |
|
76.2≤Outer Diameter≤101.6 |
±0.38 |
|
101.6<Outer Diameter≤190.5 |
+0.38/-0.64 |
|
190.5<Outer Diameter≤228.6 |
+0.38/-1.14 |
Astm A213 Alloy Steel T5 Seamless Tubes Wall thickness
Hot rolled | Outside Diameter, mm | Tolerance, % |
Outer Diameter≤101.6, Wall Thickness≤2.4 | +40/-0 | |
Outer Diameter≤101.6, 2.4<Wall Thickness≤3.8 | +35/-0 | |
Outer Diameter≤101.6, 3.8<Wall Thickness≤4.6 | +33/-0 | |
Outer Diameter≤101.6, Wall Thickness>4.6 | +28/-0 | |
Outer Diameter>101.6, 2.4<Wall Thickness≤3.8 | +35/-0 | |
Outer Diameter>101.6, 3.8<Wall Thickness≤4.6 | +33/-0 | |
Outer Diameter>101.6, Wall Thickness>4.6 | +28/-0 | |
Cold Drawn | Outside Diameter, mm | Tolerance, % |
Outer Diameter≤38.1 | +20/-0 | |
Outer Diameter>38.1 | +22/-0 |
Astm A213 Alloy Steel T5 Seamless Tubes Weight
Nominal Pipe Size |
Pipe Outer Diameter |
Wall Thickness |
Pipe Inner Diameter |
Weight per Foot |
Standard to XXHY |
Schedule Pipe # |
Section Modulus |
Gallon Capacity Per Linear Foot |
1/2 |
0.84 |
0.109 |
0.622 |
0.85 |
STD |
40 |
.0407 |
.0158 |
0.147 |
0.546 |
1.09 |
XHY |
80 |
.0478 |
.0122 |
||
0.188 |
0.464 |
1.31 |
160 |
.0528 |
.0088 |
|||
0.294 |
0.252 |
1.72 |
XXHY |
.0577 |
.0026 |
|||
3/4 |
1.05 |
0.113 |
0.824 |
1.13 |
STD |
40 |
.0705 |
.0277 |
0.154 |
0.742 |
1.48 |
XHY |
80 |
.0853 |
.0225 |
||
0.219 |
0.612 |
1.95 |
160 |
.1006 |
.0153 |
|||
0.308 |
0.434 |
2.44 |
XXHY |
.1103 |
.0077 |
|||
1 |
1.315 |
0.133 |
1.049 |
1.68 |
STD |
40 |
.1328 |
.0449 |
0.179 |
0.957 |
2.17 |
XHY |
80 |
.1606 |
.0374 |
||
0.250 |
0.815 |
2.85 |
160 |
.1904 |
.0271 |
|||
0.358 |
0.599 |
3.66 |
XXHY |
.2136 |
.0146 |
|||
1 1/4 |
1.66 |
0.140 |
1.380 |
2.27 |
STD |
40 |
.2346 |
.0777 |
0.191 |
1.278 |
3.00 |
XHY |
80 |
.2913 |
.0666 |
||
0.250 |
1.160 |
3.77 |
160 |
.3421 |
.0549 |
|||
0.382 |
0.896 |
5.22 |
.4110 |
.0328 |
||||
1 1/2 |
1.90 |
0.145 |
1.610 |
2.72 |
STD |
40 |
.3262 |
.1058 |
0.200 |
1.500 |
3.63 |
XHY |
80 |
.4118 |
.0918 |
||
0.281 |
1.338 |
4.86 |
160 |
.5079 |
.0730 |
|||
0.400 |
1.100 |
6.41 |
.5977 |
.0494 |
||||
2 |
2.375 |
0.109 |
2.157 |
2.64 |
10 |
.4205 |
.1898 |
|
0.154 |
2.067 |
3.66 |
STD |
40 |
.5606 |
.1743 |
||
0.218 |
1.939 |
5.03 |
XHY |
80 |
.7309 |
.1534 |
||
0.250 |
1.875 |
5.68 |
.8045 |
.1434 |
||||
0.281 |
1.813 |
6.29 |
.8666 |
.1344 |
||||
0.344 |
1.687 |
7.47 |
160 |
.9806 |
.1161 |
|||
0.436 |
1.503 |
9.04 |
XXHY |
1.1043 |
.0922 |
|||
2 1/2 |
2.875 |
0.120 |
2.635 |
3.53 |
10 |
.6870 |
.2833 |
|
0.203 |
2.469 |
5.80 |
STD. |
40 |
1.0640 |
.2487 |
||
0.216 |
2.443 |
6.14 |
1.1169 |
.2435 |
||||
0.250 |
2.375 |
7.02 |
1.2468 |
.2301 |
||||
0.276 |
2.323 |
7.67 |
XHY |
80 |
1.3386 |
.2202 |
||
0.375 |
2.125 |
10.02 |
160 |
1.6371 |
.1842 |
|||
0.552 |
1.771 |
13.71 |
XXXHY |
1.9971 |
.1280 |
|||
3 |
3.50 |
0.120 |
3.260 |
4.34 |
1.0411 |
.4336 |
||
0.156 |
3.188 |
5.58 |
1.3122 |
.4147 |
||||
0.172 |
3.156 |
6.12 |
1.4265 |
.4064 |
||||
0.188 |
3.124 |
6.66 |
1.5342 |
.3984 |
||||
0.216 |
3.068 |
7.58 |
STD. |
40 |
1.7241 |
.3840 |
||
0.250 |
3.000 |
8.69 |
1.9372 |
.3672 |
||||
0.281 |
2.938 |
9.67 |
2.1207 |
.3521 |
||||
0.300 |
2.900 |
10.26 |
XHY |
80 |
2.2253 |
.3431 |
||
0.438 |
2.624 |
14.34 |
160 |
2.8774 |
.2811 |
|||
0.600 |
2.300 |
18.6 |
XXHY |
3.4243 |
.2158 |
|||
3 1/2 |
4.0 |
0.120 |
3.760 |
4.98 |
10 |
1.3776 |
.5768 |
|
0.226 |
3.548 |
9.12 |
STD. |
140 |
2.3939 |
.5136 |
||
0.250 |
3.500 |
10.02 |
2.6001 |
.4998 |
||||
0.281 |
3.438 |
11.17 |
2.8562 |
.4821 |
||||
0.318 |
3.364 |
12.52 |
XHY |
80 |
3.1400 |
.4617 |
||
0.636 |
2..728 |
22.87 |
XXHY |
4.8795 |
.3085 |
|||
4 |
4.5 |
0.120 |
4.260 |
5.62 |
10 |
1.7612 |
.7404 |
|
0.156 |
4.188 |
7.24 |
2.2354 |
.7156 |
||||
0.188 |
4.124 |
8.67 |
2.6296 |
.6942 |
||||
0.203 |
4.094 |
9.32 |
2.8173 |
.6838 |
||||
0.219 |
4.062 |
10.02 |
3.0184 |
.6725 |
||||
0.237 |
4.026 |
10.80 |
STD. |
40 |
3.2145 |
.6613 |
||
0.250 |
4.000 |
11.36 |
3.3611 |
.6528 |
||||
0.281 |
3.938 |
12.67 |
60 |
3.7021 |
.6326 |
|||
0.312 |
3.876 |
13.97 |
4.0273 |
.6126 |
||||
0.337 |
3.826 |
15.00 |
XHY |
80 |
4.2713 |
.5972 |
||
0.438 |
3.624 |
19.02 |
120 |
5.1790 |
.5361 |
|||
0.531 |
3.438 |
22.53 |
160 |
5.8997 |
.4822 |
|||
0.674 |
3.152 |
27.57 |
XXHY |
6.7927 |
.4054 |
|||
5 |
5.563 |
0.188 |
5.187 |
10.80 |
4.1161 |
1.0979 |
||
0.219 |
5.125 |
12.51 |
4.7279 |
1.0716 |
||||
0.258 |
5.047 |
14.63 |
STD. |
40 |
5.4500 |
1.0391 |
||
0.281 |
5.001 |
15.87 |
5.8644 |
1.0204 |
||||
0.312 |
4.939 |
17.51 |
6.4074 |
.99647 |
||||
0.344 |
4.875 |
19.19 |
6.9358 |
.9696 |
||||
0.375 |
4.813 |
20.80 |
XHY |
80 |
7.4300 |
.9449 |
||
0.500 |
4.563 |
27.06 |
120 |
9.2534 |
.8495 |
|||
0.625 |
4.313 |
32.99 |
160 |
10.7976 |
.7590 |
|||
0.750 |
4.063 |
38.59 |
XXHY |
12.0954 |
.6734 |
|||
6 |
6.625 |
0.109 |
6.407 |
7.59 |
5 |
3.5769 |
1.6748 |
|
0.134 |
6.357 |
9.30 |
10 |
4.3475 |
1.6488 |
|||
0.156 |
6.313 |
10.79 |
5.0107 |
1.6260 |
||||
0.188 |
6.249 |
12.94 |
5.9351 |
1.5937 |
||||
0.203 |
6.219 |
13.94 |
6.3804 |
1.5780 |
||||
0.219 |
6.187 |
15.00 |
6.8261 |
1.5620 |
||||
0.250 |
6.125 |
17.04 |
7.6905 |
1.5306 |
||||
0.280 |
6.065 |
18.99 |
STD. |
40 |
8.4958 |
1.5008 |
||
0.312 |
6.001 |
21.06 |
9.3416 |
1.4688 |
||||
0.344 |
5.937 |
23.10 |
10.111 |
1.4391 |
||||
0.375 |
5.875 |
25.05 |
10.893 |
1.4082 |
||||
0.432 |
5.761 |
28.60 |
XHY |
80 |
12.224 |
1.3541 |
||
0.500 |
5.625 |
32.74 |
13.711 |
1.2909 |
||||
0.562 |
5.501 |
36.43 |
120 |
14.9806 |
1.2346 |
|||
0.625 |
5.375 |
40.09 |
16.1821 |
1.1787 |
||||
0.719 |
5.187 |
45.39 |
160 |
17.8243 |
1.0977 |
|||
0.864 |
4.897 |
53.21 |
XXHY |
20.025 |
.9784 |
|||
1.000 |
4.625 |
60.13 |
21.7719 |
.8727 |
||||
1.125 |
4.375 |
66.14 |
23.1237 |
.7809 |
Astm A213 Alloy Steel T5 Seamless Tubes Size Chart
Size |
Thickness |
ID |
Lbs per Foot |
Price(£) |
|
3/16 |
|||||
0.028 |
0.132 |
0.048 |
|||
7/16 |
|||||
0.028 |
0.382 |
0.123 |
15.12 |
||
1/4 |
|||||
0.028 |
0.194 |
0.067 |
8.15 |
||
0.035 |
0.18 |
0.08 |
4.52 |
||
0.049 |
0.152 |
0.105 |
7.09 |
||
0.058 |
0.134 |
0.119 |
16.94 |
||
0.065 |
0.12 |
0.128 |
10.73 |
||
5/16 |
|||||
0.028 |
0.257 |
0.085 |
9.72 |
||
0.035 |
0.243 |
0.104 |
6.71 |
||
0.049 |
0.215 |
0.138 |
8.71 |
||
0.058 |
0.197 |
0.158 |
8.15 |
||
0.065 |
0.183 |
0.172 |
9.90 |
||
0.095 |
0.123 |
0.221 |
8.71 |
||
3/8 |
|||||
0.028 |
0.319 |
0.104 |
6.59 |
||
0.035 |
0.305 |
0.127 |
5.45 |
||
0.049 |
0.277 |
0.171 |
5.65 |
||
0.058 |
0.259 |
0.196 |
5.45 |
||
0.065 |
0.245 |
0.215 |
5.27 |
||
0.083 |
0.209 |
0.259 |
9.41 |
||
0.095 |
0.185 |
0.284 |
7.51 |
||
7/16 |
|||||
0.035 |
0.368 |
0.151 |
5.58 |
||
0.049 |
0.34 |
0.204 |
7.15 |
||
0.065 |
0.308 |
0.259 |
6.59 |
||
0.095 |
0.248 |
0.348 |
9.41 |
||
0.12 |
0.198 |
0.408 |
9.47 |
||
1/2 |
|||||
0.028 |
0.444 |
0.141 |
6.01 |
||
0.035 |
0.43 |
0.174 |
4.82 |
||
0.049 |
0.402 |
0.236 |
5.45 |
||
0.058 |
0.384 |
0.274 |
4.39 |
||
0.065 |
0.37 |
0.302 |
6.84 |
||
0.083 |
0.334 |
0.37 |
6.14 |
||
0.095 |
0.31 |
0.411 |
9.41 |
||
0.12 |
0.26 |
0.487 |
7.49 |
||
9/16 |
|||||
0.035 |
0.493 |
0.197 |
10.35 |
||
0.049 |
0.465 |
0.269 |
7.02 |
||
0.065 |
0.433 |
0.346 |
11.61 |
||
0.12 |
0.323 |
0.568 |
11.23 |
||
5/8 |
|||||
0.028 |
0.569 |
0.179 |
6.71 |
||
0.035 |
0.555 |
0.221 |
5.45 |
||
0.049 |
0.527 |
0.301 |
4.95 |
||
0.058 |
0.509 |
0.351 |
5.00 |
||
0.065 |
0.495 |
0.389 |
8.53 |
||
0.095 |
0.435 |
0.538 |
9.90 |
||
0.12 |
0.385 |
0.647 |
6.71 |
||
0.156 |
0.313 |
0.781 |
12.40 |
||
3/4 |
|||||
0.028 |
0.694 |
0.216 |
7.22 |
||
0.035 |
0.68 |
0.267 |
4.57 |
||
0.049 |
0.652 |
0.367 |
4.19 |
||
0.058 |
0.634 |
0.429 |
4.19 |
||
0.065 |
0.62 |
0.476 |
5.45 |
||
0.095 |
0.56 |
0.665 |
9.41 |
||
0.12 |
0.51 |
0.807 |
7.47 |
||
0.156 |
0.438 |
0.99 |
9.41 |
||
0.188 |
0.374 |
1.128 |
13.23 |
||
7/8 |
|||||
0.035 |
0.805 |
0.314 |
4.90 |
||
0.049 |
0.777 |
0.432 |
5.96 |
||
0.058 |
0.759 |
0.506 |
5.71 |
||
0.065 |
0.745 |
0.562 |
6.46 |
||
0.083 |
0.709 |
0.702 |
6.21 |
||
0.095 |
0.685 |
0.791 |
7.83 |
||
0.12 |
0.635 |
0.968 |
9.47 |
||
0.188 |
0.499 |
1.379 |
15.68 |
||
1 |
|||||
0.035 |
0.93 |
0.361 |
4.95 |
||
0.028 |
0.944 |
0.291 |
8.46 |
||
0.049 |
0.902 |
0.498 |
4.70 |
||
0.058 |
0.884 |
0.584 |
4.64 |
||
0.065 |
0.87 |
0.649 |
4.70 |
||
0.095 |
0.81 |
0.001 |
5.53 |
||
0.12 |
0.76 |
1.128 |
9.41 |
||
0.156 |
0.688 |
1.406 |
13.18 |
||
0.188 |
0.624 |
1.63 |
15.98 |
||
1-1/8 |
|||||
0.035 |
1.055 |
0.407 |
9.90 |
||
0.049 |
1.027 |
0.563 |
6.71 |
||
0.058 |
1.009 |
0.661 |
5.58 |
||
0.065 |
0.995 |
0.736 |
6.71 |
||
0.095 |
0.935 |
1.045 |
8.46 |
||
0.12 |
0.885 |
1.288 |
14.80 |
||
1-1/4 |
|||||
0.035 |
1.18 |
0.454 |
7.02 |
||
0.049 |
1.152 |
0.629 |
6.59 |
||
0.058 |
1.134 |
0.738 |
8.15 |
||
0.065 |
1.12 |
0.823 |
6.71 |
||
0.083 |
1.084 |
2.132 |
6.71 |
||
0.095 |
1.06 |
1.172 |
7.34 |
||
0.12 |
1.01 |
1.448 |
11.03 |
||
0.156 |
0.938 |
1.823 |
18.25 |
||
1-3/8 |
|||||
0.049 |
1.277 |
0.694 |
8.59 |
||
0.035 |
1.305 |
0.501 |
7.40 |
||
0.058 |
1.259 |
0.816 |
6.71 |
||
0.065 |
1.245 |
0.909 |
5.71 |
||
0.095 |
1.185 |
1.299 |
7.22 |
||
0.12 |
1.135 |
1.609 |
12.17 |
||
0.188 |
0.999 |
2.383 |
16.18 |
||
1-1/2 |
|||||
0.035 |
1.43 |
0.548 |
8.46 |
||
0.049 |
1.402 |
0.759 |
7.15 |
||
0.058 |
1.384 |
0.893 |
8.63 |
||
0.065 |
1.37 |
0.996 |
7.47 |
||
0.083 |
1.334 |
1.256 |
8.28 |
||
0.095 |
1.31 |
1.426 |
8.46 |
||
0.12 |
1.26 |
1.769 |
11.03 |
||
0.188 |
1.124 |
2.634 |
17.42 |
||
1-5/8 |
|||||
0.049 |
1.527 |
0.825 |
12.51 |
||
0.058 |
1.509 |
0.971 |
13.18 |
||
0.065 |
1.495 |
1.083 |
9.41 |
||
0.095 |
1.435 |
1.552 |
12.04 |
||
0.12 |
1.385 |
1.929 |
14.67 |
||
0.156 |
1.313 |
2.447 |
17.42 |
||
0.188 |
1.249 |
2.885 |
18.18 |
||
1-3/4 |
|||||
0.049 |
1.652 |
0.89 |
9.85 |
||
0.058 |
1.634 |
1.048 |
11.27 |
||
0.065 |
1.62 |
1.17 |
10.03 |
||
0.095 |
1.56 |
1.679 |
8.71 |
||
0.12 |
1.51 |
2.089 |
12.35 |
||
0.188 |
1.374 |
3.136 |
19.69 |
Our Blog

Latest Price list of Stainless Steel Forged Fittings
List of pipe fittings 1. Tee and Wye Fittings Three pieces of pipe are connected with tees and...
Request A Quote
Fill all information details to consult with us to get services from us
What are our quality inspection standards?
Our key qualities and services comprise of:
• Quality assured goods
• Multiple payment modes
• Experienced crew
• Prompt shipment
• Ethical business policies
• Wide distribution network
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
Which certifications have we acquired?
Lakshya International has the following certification:
• MSME UDHAYM NO
• GST CERTIFICATE
• CERTIFICATE OF INCORPORATION
• CERTIFICATE OF IMPORT EXPORT CODE
• ISO CERTIFICATE
• PED CERTIFICATE
• CE CERTIFICATE
• MANUFACTURING CERTIFICATE
How can I place an order?
To place an order and receive a quote you can visit us on our website